Coldwater, MI—July 16, 2012—From the ever expanding line up of lift kits and accessories, BDS Suspension now offers a heavy duty adjustable front track bar system to properly center the front axle on ’84-01 Jeep Cherokee XJs with 6-9″ of lift.
This system includes new solid steel track bar, heavy duty dual shear frame mount bracket, new axle support bracket with integrated steering stabilizer mount, and all necessary hardware.
The new track bar itself in constructed from 1-1/8″ solid steel with 1″-14 male threads for fine adjustments and a rebuildable flex end for strength and durability. This system must be installed in conjunction with a drop pitman arm.
For more info on this XJ Adjustable Track Bar and other Jeep products, check out BDS Suspension or call (517) 279-2135.
Coldwater, MI—June 22, 2012— BDS Suspension is now offering one-piece tube style 1.5″ transfer-case drop kits to work fit lifted Jeep Wrangler YJ and Wrangler TJ models. These new Made in the USA kits utilize 1-piece steel tube drop spacers at each frame rail to drop the t-case 1.5″ to reposition the transfer case output shaft on lifted applications. The tubes are e-coated black and include all the necessary hardware for install. Plastic end caps are provided to keep dirt/mud out of the tubes and give a nice finished look. These new transfer case drops are included on application BDS suspension lifts or available for purchase individually.
For more info on these and other BDS Suspension products, check out BDS Suspension or call (517) 279-2135.
Coldwater, MI—April 25, 2012— BDS now offers a track bar rebuild kit for BDS track bar ball stud ends on ZJ, XJ, and TJ models. The kit includes new bushings, washers, and snap rings for a quick and easy rebuild.
For more info on the this bushing kit and distributors near you, check out BDS Suspension or call (517) 279-2135.
Jeep Track Bar Flex End Bushing Kit #074113
Hi-res image: acc_074113.jpg
Coldwater, MI—April 20, 2012— BDS is excited to release a new style alignment cam far superior to the tradition eccentric cams. The new OctoCam alignment cam washers allow for 5-position adjustability for caster on the front axle or pinion angle on the rear axle. The cams work with the factory control arm hardware and will not slip under load like traditional eccentric cam setups can. Available in sets of four, each set of OctoCams will complete one axle.
For more info on the JK OctoCam alignment cams and find the distributor nearest you, check out BDS Suspension or call (517) 279-2135.
JK OctoCam Alignment Cam Kit #124330
Hi-res image: acc_124330.jpg
New for 2012 is the Pentastar 3.6L in the Wrangler and Wrangler Unlimited models. For those of you looking to lift your new 2012 JK, the factory exhaust crossover pipe is in close proximity to the front driveshaft limiting the amount of droop to about 2” before they come in contact with each other. To combat this problem BDS Suspension has developed exhaust extensions (#124314) to relocate the crossover pipe rearward allowing for addition clearance and full range of motion of the front driveshaft with 3” of lift. The extensions are precision machined from 2.5” x .250” wall DOM tubing to fit the factory ball/taper seat connection properly for a leak-proof seal. Thick-walled tubing is used to ensure the extension will not deform under extreme heat conditions. Longer hardware is included to compensate for the added extension length and allow the reuse of the factory clamp collars. Installation is a breeze and can be done in a matter of minutes with basic hand tools. For more info on this kit, contact BDS Suspension at (517) 279-2135 or bds-suspension.com
Press Release #113 – Fox 2.0 Performance Series Shocks for BDS Lift Kits
Coldwater, MI– August 23, 2011– BDS Suspension and Fox Racing have teamed up and are proud to announce the release of a full line of Fox 2.0 Performance Series Shocks. BDS and Fox engineers developed this monotube shock with compression and rebound valving tuned specifically to optimize the ride and performance of your BDS equipped rig. The Fox 2.0 is an upgrade option for most BDS Suspension kit applications and is designed to be a direct bolt in for easy installation.
The Fox 2.0 features specially formulated race oil and a cold-forged, metalimpacted 6061 T6 aluminum body capable of dissipating heat 3 times faster than conventional steel body shock improving overall performance and longevity.
Case hardened 5/8’’ chrome shafts provide extreme durability and cnc-machined type II hard black anodized aluminum components provide a rugged fade free finish.
Unlike the emulsion shocks you may be familiar with, this new monotube performance shock features an internal floating piston (IFP) designed to separate Fox’s formulated race shock oil from the high-pressure nitrogen charged gas chamber. This constant pressure eliminates oil aeration and foaming, providing a consistent, predictable ride under the roughest driving conditions with fade-free performance.
Designed and tested for BDS Suspension applications, these shocks are ready to bolt on and perform, not to mention look great right out of the box. Get the most out of your ride today with BDS Suspension and Fox 2.0 Performance Series shocks.
Recent Comments