NEW PRODUCT AnNouncement
November 19, 2015
PR.223: 5.5″ IFS Lift Kits
#722FDSC (5.5″ System w/ DSC C/O)
#FOX88306136 (DSC C/O Upgrade)
5.5″ Performance Coilover System &
Fox Coilover w/ DSC Upgrade Kit
2015-2016 Chevy Colorado 4wd
2015-2016 GMC Canyon 4wd
*gas only (diesel not available to be test fit)
$3814.10 (5.5″ DSC C/O System)
$1894.95 (C/O Upgrade)
SUPPORT FILES & LINKS
BDS 5.5″ Performance DSC Coilover Systems for 2015-16 Chevy Colorado/GMC Canyon Trucks
BDS Suspension ups the ante on 2015-2016 Colorado/Canyon trucks with new 5.5″ DSC Coilover Systems featuring FOX’s 2.5 DSC remote coilovers. This new system improves upon BDS’s standard 5.5″ IFS lift kits as well as the soon to be released performance coilover systems with a pair of specially built FOX 2.5 coilovers with dual speed compression (DSC) adjusters for easily tunable ride quality ideal for dialing in the trucks ride performance for any terrain while offering superior performance when you’re blazing a trail through Baja.
This newest suspension option is available as both an upgrade for current Colorado/Canyon trucks running the BDS 5.5″ kits as well as complete 5.5″ DSC C/O System ready to transform your stock truck into a trail monster.
As with all BDS lift kits this new 5.5″ DSC C/O System is backed by Factory Protection Plus (FPP) offering peace of mind whether you’re on the road or off the beaten path. FPP combines BDS’s No Fine Print Lifetime Warranty, FMVSS No.126 ESC system compliance, and a 5-year 60,000-mile drivetrain warranty at no additional cost to the consumer.
Improve the stance and capability of your 2015-2016 Chevy Colorado or GMC Canyon with BDS Suspension and FOX.
For more information on the kit see below, head online to BDS Suspension or call (517) 279-2135.
5.5″ Colorado/Canyon DSC Coilover Lift Kits: BDS raises the bar once again with new 5.5″ DSC Coilover Systems for the 2015-2016 Colorado/Canyon. Designed around the tried-and-true steering knuckle and crossmember technology, these kits provide enough lift fit 33″ tires while maintaining the OE suspension geometry for smooth handling and ride characteristics. Along with the rugged, high clearance design to maximize ground clearance, this new system has passed the National Highway Traffic Safety Administration’s Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely effect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck.
This system uses a pair of heavy duty 1/4″ steel high clearance crossmembers to reposition the lower control arms and work in unison with the massive ductile cast iron extended steering knuckles. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects vital front end components for offroad use and ties the crossmembers together for a extremely rigid subframe. The front differential is relocated to keep CV axle angles at a minimum and function properly with the supplied transfer case indexing ring. This allows for the use of the factory front driveline once lifted. Front bump stop extension and sway bar links are included as well as new heavy duty Moog tie rod ends to properly set alignment without trimming the inner tie rods. In place of the factory struts this system uses precision tuned FOX 2.5 remote coilovers with DSC adjustment technology.
DSC is the next big thing allowing for easy adjustment of the your truck’s suspension compression dampening allowing you to dial in the ideal ride performance soaking up bumps large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the “blue” high speed and “gold” low speed compression knobs located on the end of the remote reservoir of the FOX 2.5 coilovers. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail.
Finishing off this new 5.5″ DSC coilover system, a 4″ rear block/u-bolt kit sets the new ride height and levels the stance. Specially tuned FOX 2.0 series IFP gas shocks are supplied to compliment the front coilovers and improve the Colorado/Canyon’s performance on or offroad. While the kits have not been test fit on the soon to be released 2.8L Duramax equipped trucks, it has been approved for use on the 2015-2016 gas model trucks and improves performance across any terrain and allows owners to install 33″ tires.
If you’re looking to up the ante an built your new Colorado/Canyon for any terrain, look no further than BDS and FOX with this new 5.5″ Performance Coilover System w/ DSC Adjusters. For more info on the kit and to find a dealer near you head online to bds-suspension.com.
Important Kit Notes:
Max Tire/Wheel Recommendations: