2 Inch Lift Kit | Jeep Comanche MJ (86-91)

Brand: BDS
SKU: BDS438H
Kit Component List

×
$469.50
Subtotal: $469.50

I have read the Important Notes and Verified my Vehicle Fitment

2 Inch Lift Kit | Jeep Comanche MJ (86-91)

2 Inch Lift Kit | Jeep Comanche MJ (86-91)

$469.50

2 Inch Lift Kit | Jeep Comanche MJ (86-91)

$469.50
Rear Axle Option: Chrysler 8.25

Improve the style and handling of your 1986-1991 Jeep Commanche MJ with this 2-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability of the Commanche MJ, this kit includes everything necessary to set your truck up right with clearance for up to 30" tires.

Up front the lift kit includes Glide-Ride coil springs and the rear utilizes a long thin add-a-leaf to add height without creating a harsh ride. These kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

Pro-Ride Coil Springs

A pair of full-length, Jeep-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features & Benefits

  • ProRide coil springs offer improved ride quality and more articulation
  • Easy, 100% Bolt-on installation
  • NX2 gas shocks for improved damping
  • Allows clearance for 30" tires

Recommended Tires & Wheels

(Trimming may be required)

  • 30 x 9.5 with 15 x 7 and 4 in. Backspace

Rear Axle Option

The Jeep Cherokee was produced with two different rear axles (Chrysler 8.25 or Dana 35). You will need to measure your rear u-bolts to ensure that you get the correct new u-bolts. Basically, just measure the diameter of the axle or the I.D. of your rear u-bolts. Chrysler axles require 3" wide u-bolts and Dana 35 axles require 2-3/4" wide u-bolts. Some 1987-90 models came with a Dana 44. Measure and call BDS for proper u-bolt fitment.

  1. The Jeep Comanche was produced with two different rear axles (Chrysler 8.25 or Dana 35). You will need to measure your rear u-bolts to ensure that you get the correct new u-bolts. Basically, just measure the diameter of the axle or the I.D. of your rear u-bolts.