Build Your Kit

2009-11 Dodge 1500 4WD<br>6" Suspension System

2009-11 Dodge 1500 4WD
6" Suspension System

6" Suspension Lift Kit - 2009-11 Dodge 1500 4WD

  • *Approx Price: $2,526.81
  • Front (base kit): 6" IFS System
  • Rear (base kit): 5" Coil Spring
  • Print summary
2009-11 Dodge 1500 4WD<br>6" Suspension System

Kit Components

Accessories & Pricing


Qty Part# Description
1 022509 09 Dodge 1500 5 In Rear
1 022605 06 Dodge 6" Box 4 Of 4
1 022620 06-10 Dodge 1500 6in Front Box Kt (1of4)
1 022621 06-10 Dodge 1500 6in Front Box Kt (2of4)
1 022623 06-10 Dodge 1500 6in Front Box Kt (3of4)
2 55759 Hydraulic Shock Absorber
Qty Part# Description Price
    Total $2,526.81

Important Kit Notes

  • 1. These trucks can vary from 1" to 3" tail high from the factory. Be sure to measure your vehicle before ordering. Part numbers 022209, 022309 and 022509 can all be substituted to achieve the desired stance.
  • 2. The Rack & Pinion steering system is extremely sensitive to an out of round or out of balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy.
  • 3. Not recommended for AWD models.
  • 4. Stock 17" and 18" wheels cannot be reinstalled. Stock 20" wheels can be reinstalled with factory tires.
  • 5. TRX models will achieve approximately 1" additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for 5" of lift or replace the TRX struts with standard struts for use with this system.
  • 6. This kit is FMVSS No.126 Compliant
  • FMVSS No.126 compliant
  • The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

  • BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.
  • 6" Suspension Lift Kit - 2009-11 Dodge 1500 4WD

  • Front (base kit):

    6" IFS System

  • Rear (base kit):

    5" Coil Spring

  • Kit Price

    $2,526.81

Base Kit Components 622H

These components are subject to change based upon your selections.

Qty Part# Description
(1) 022509 09 Dodge 1500 5 In Rear
(1) 022605 06 Dodge 6" Box 4 Of 4
(1) 022620 06-10 Dodge 1500 6in Front Box Kt (1of4)
(1) 022621 06-10 Dodge 1500 6in Front Box Kt (2of4)
(1) 022623 06-10 Dodge 1500 6in Front Box Kt (3of4)
(2) 55759 Hydraulic Shock Absorber

Compatible Vehicles

These vehicles also are compatible with this product.
Click on a vehicle to see other available kits.

Make Model Type Year Range
Dodge / Ram Ram 1/2 Ton Pickup 1500 2009-2011

Email Summary

  *required information
*To Email Address
*To Name
*From Name
Message
Send Order

Important Kit Notes

  • 1. These trucks can vary from 1" to 3" tail high from the factory. Be sure to measure your vehicle before ordering. Part numbers 022209, 022309 and 022509 can all be substituted to achieve the desired stance.
  • 2. The Rack & Pinion steering system is extremely sensitive to an out of round or out of balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy.
  • 3. Not recommended for AWD models.
  • 4. Stock 17" and 18" wheels cannot be reinstalled. Stock 20" wheels can be reinstalled with factory tires.
  • 5. TRX models will achieve approximately 1" additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for 5" of lift or replace the TRX struts with standard struts for use with this system.
  • 6. This kit is FMVSS No.126 Compliant
  • FMVSS No.126 compliant
  • The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

  • BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Next: Steering Stabilizer Options


BDS - An Employee Owned Company american flag image

We make every effort to buy American and we hope you do as well. Buying American ensures that you are getting quality products made from quality materials. Just as important is the fact that buying American keeps your hard-earned money in the American economy. This is one of the biggest ways we as consumers can help revitalize the American economy and strengthen the US dollar. It doesn’t matter whether you are buying clothing, groceries or parts for your truck…buy American and buy with confidence that your money will stay in America.

Find your nearest participating Dealer

Your nearest dealer information will be added to your Kit Summary