Not a member? Sign Up!
Use only letters and numbers in password.
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.
This system includes a new upper strut mount as well as pre-load spacers. The use of a pre-load spacer increases performance in cornering as well as offsets the increase weight of larger tires to maintain a quality ride. Unlike most systems on the market, the two piece system does not max out the upper ball joints during suspension travel.
A 1" rear block kit is available to maintain a slight rake if desired. Add new 5500 series rear shocks for increased stability and improved handling when customizing your kit.
While the 2014 F-150 is essentially identical to the 2013, Ford did update the front strut design. This new design utilizes a bar pin style mount at the LCA verse the previous model that uses a traditional double-shear bracket mount.
While change makes it so the BDS replacement strut kit does not fit the new model, we were able to use the base design of the 4" strut spacer kit to develop a new lift for the 2014. The new 4" lift is nearly the same as the 09-13 4" lift and therefore has all the great features and benefits. The strut spacer/rear block combo nets 4" of front lift and 2.5" in the rear.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection. The new strut spacers for the front offer easier installation without the need to disassemble the struts and maintain the OE ride quality.
The rear is lifted with a new block and includes a new offset spring plate to center the rear axle and give your 37's plenty of room.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Ford F150 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection.
Out back Fox 2.0 shocks keep things under control and the rear lift is achieved with a new 5" block which includes a new offset spring plate to center the rear axle to give your 37's plenty of room.
Shotpeening increases tensile strength and reduces fatigue while lessening the material thickness required. The thinner material allows for increased wheel travel and provides a softer ride.
Bolt-style leaf alignment clamps prevent leaves from fanning out and allow the leaves to twist and flex, yielding higher articulation.
Each spring is preset using hydraulic stress to reduce fatigue in the steel and prevent sagging.
Some applications include leaf springs with steel encased rubber bushings. Other applications include blue urethane bushings.
Anti-friction pads are placed between the leaves to reduce friction within the spring and noise from metal-to-metal contact.
Tapered and roll-pointed leaves add flexibility and provides an even deflection rate. Tapering allows a smoother transition between leaves as compression takes place, resulting in a softer ride with increased wheel travel.
Springs are either cold wound with chrome silicon 9254 or hot wound with 5160 to guarantee long life.
BDS coil springs are designed to withstand full coil bind. In other words, you can smash our coils to totally flat and they will return to their original height.
A polyester based powder coat is applied to ensure flexibility and durability.
Each spring is preset with a hydraulic stress to reduce fatigue in the steel and prevent sagging.
Shotpeening increases tensile strength and allows for maximum wheel travel without sacrificing the life of the spring.