Factory Protection Plus

Search by Vehicle

Click any menu level to view selection(s)

Click arrow to select your year
  • All Years
  • 1942
  • 1943
  • 1944
  • 1945
  • 1946
  • 1947
  • 1948
  • 1949
  • 1950
  • 1951
  • 1952
  • 1953
  • 1954
  • 1955
  • 1956
  • 1957
  • 1958
  • 1959
  • 1960
  • 1961
  • 1962
  • 1963
  • 1964
  • 1965
  • 1966
  • 1967
  • 1968
  • 1969
  • 1970
  • 1971
  • 1972
  • 1973
  • 1974
  • 1975
  • 1976
  • 1977
  • 1978
  • 1979
  • 1980
  • 1981
  • 1982
  • 1983
  • 1984
  • 1985
  • 1986
  • 1987
  • 1988
  • 1989
  • 1990
  • 1991
  • 1992
  • 1993
  • 1994
  • 1995
  • 1996
  • 1997
  • 1998
  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019

Click arrow to select your vehicle
  • Chevy / GMC
    • 1 Ton Pickup 2WD
    • 1 Ton Pickup 4WD
    • 1/2 Ton Pickup 2WD
    • 1/2 Ton Pickup 4WD
    • 1500 Pickup
    • 3/4 Ton Pickup 2WD
    • 3/4 Ton Pickup 4WD
    • Avalanche 1500 4WD
    • Avalanche 2500 4WD
    • Colorado ZR2
    • Colorado/Canyon
    • Escalade AWD
    • K5 Blazer/Fullsize Jimmy 4WD
    • Pickup 4WD
    • S-10 Series 4WD
    • Suburban 1/2 Ton 4WD
    • Suburban 3/4 Ton 4WD
    • Tahoe / Yukon 4WD
    • Trailblazer / Envoy
    • Van G10, G20, G30 2WD
    • Yukon XL 1/2 Ton 4WD
    • Yukon XL 3/4 Ton 4WD
  • Dodge / Ram
    • "W" Pickup 1/2 & 3/4 Ton
    • 1 Ton Pickup 4WD
    • 1/2 Ton Pickup 4WD
    • 1500 Mega Cab
    • 1500 Pickup
    • 2500 Pickup
    • 2500 Power Wagon
    • 3/4 Ton Pickup 4WD
    • 3500 Pickup
    • Dakota
    • Pickup 4WD
    • Ramcharger, Trailduster 4WD
  • Ford
    • Bronco 4WD
    • Bronco II 2WD
    • Bronco II 4WD
    • Excursion 4WD
    • Expedition
    • Explorer
    • F100 2WD
    • F100 4WD
    • F150 2WD
    • F150 4WD
    • F150 Raptor
    • F250 / F350
    • F250 2WD
    • F250 4WD
    • F250 TTB 4WD
    • F350 2WD
    • F350 4WD
    • F350 Monobeam 4WD
    • Ranger 2WD
    • Ranger 4WD
    • Van E-Series
  • Geo
    • Tracker - 2 Door
  • Jeep
    • Cherokee
    • CJ Series
    • Comanche
    • Commander
    • Gladiator
    • Grand Cherokee
    • J10, J20 Pickup
    • Liberty
    • Pickup
    • Wagoneer
    • Wrangler
    • Wrangler RHD
  • Mazda
    • Pickup 4WD
  • Other
    • International Pickup, Travelall
  • Suzuki / Geo
    • Samurai
    • Sidekick - 2 Door
  • Toyota
    • 4 Runner 4WD
    • FJ Cruiser 4WD
    • Pickup IFS 4WD
    • T100 4WD
    • Tacoma 2WD
    • Tacoma 4WD
    • Tundra 2WD
    • Tundra 4WD

Signup for eNews

Be first to know about new products and offroad news from BDS Suspension sign up»

Career Opportunities

BDS Suspension/Sport Truck USA, Inc. job openings details»

2019 Chevy / GMC 1/2 Ton Pickup 4WD w/o Magneride

transparent image

Kit Photo

Click image to open larger overlay image.

transparent image

Kit Photo

6" Suspension System | Chevy/GMC 1500 4WD 6" Suspension System | Chevy/GMC 1500 4WD

BDS Suspension Lift Kit Warranty

No Fine Print Warranty

All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.

STEP 1: Choose lift height

6" Suspension System | Chevy/GMC 1500 4WD

  • Price $1,996.73

  • Base Kit Id 746H

2019 Chevy/GMC 1500 6" Lift Systems

Based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, these systems have been designed from the ground up to get the more out of your truck with the most ground clearance on the market. This 6" lift system brings you on road comfort, off-road capability and clearance for 35-37" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver. These kits have been independently tested and certified compliant with these standards with up to 37" tires.

At the heart of this 6" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies. These allow for quick-simple installation without the need to disassemble the factory struts and retain the OE ride quality. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of this 6" lift system, the factory block is replaced with a 5" lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, FMVSS No.126 (ESC System) compliance certification and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Chevy/GMC 1500 truck with this 6" lift system from BDS Suspension.

  • Tire & Wheel Combinations
  • 37" x 12.50" w/20 x 9 (Chevy) and 5.5" - 6.25" back spacing
  • 35" x 12.50" w/20x9 (Chevy) and 4.5" - 5" back spacing
  • 35" x 12.50" w/20 x 9 (GMC) and 4.5" - 6.25" back spacing
  • *Trimming may be required*

  • Est. Installation: 8 hours
  • Difficulty Level (easy 1 - 5 complicated): 4
  •  
  • View complete Vehicle Fitment Information here

Glide-Ride Leaf Spring Suspension Systems

Shotpeening increases tensile strength and reduces fatigue while lessening the material thickness required. The thinner material allows for increased wheel travel and provides a softer ride.

Bolt-style leaf alignment clamps prevent leaves from fanning out and allow the leaves to twist and flex, yielding higher articulation.

Each spring is preset using hydraulic stress to reduce fatigue in the steel and prevent sagging.

Some applications include leaf springs with steel encased rubber bushings. Other applications include blue urethane bushings.

Anti-friction pads are placed between the leaves to reduce friction within the spring and noise from metal-to-metal contact.

Tapered and roll-pointed leaves add flexibility and provides an even deflection rate. Tapering allows a smoother transition between leaves as compression takes place, resulting in a softer ride with increased wheel travel.


Pro-Ride Coil Spring Suspension Systems

Springs are either cold wound with chrome silicon 9254 or hot wound with 5160 to guarantee long life.

BDS coil springs are designed to withstand full coil bind. In other words, you can smash our coils to totally flat and they will return to their original height.

A polyester based powder coat is applied to ensure flexibility and durability.

Each spring is preset with a hydraulic stress to reduce fatigue in the steel and prevent sagging.

Shotpeening increases tensile strength and allows for maximum wheel travel without sacrificing the life of the spring.


BDS Suspension american flag image

We make every effort to buy American and we hope you do as well. Buying American ensures that you are getting quality products made from quality materials. Just as important is the fact that buying American keeps your hard-earned money in the American economy. This is one of the biggest ways we as consumers can help revitalize the American economy and strengthen the US dollar. It doesn't matter whether you are buying clothing, groceries or parts for your truck…buy American and buy with confidence that your money will stay in America.


Vehicle Fitment Information

  • 2019 Chevy / GMC 1/2 Ton Pickup 4WD w/o Magneride