Not a member? Sign Up!
Use only letters and numbers in password.
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.
A leveling kit done right! This kit comes with new upper strut mounts that increase the front ride height while maintaining the factory ride quality. A small pre-load spacer is combined with a top spacer to properly achieve height without the problems associated with the common top spacers on the market today. Unlike many, this engineered system will not max out the upper ball joint. Our leveling kit system is designed to ensure that all factory components work within their intended ranges.
This IFS system is everything you always wanted in a 2WD lift kit. Our new advanced HIGH CLEARANCE design increases the ground clearance and performance.
We use 1/4" thick steel, one-piece front and rear crossmembers to increase frame rigidity and ease installation. New ductile steering knuckles are included that correct steering geometry to O.E. angles. Custom valved front coil over strut cylinders with 18 mm shaft are included, as well as new rear 5500 series hydraulic shocks. A full belly pan for off road protection rounds out this complete lift kit system.
Black powder coating, front skid plate, and rear Glide-Ride Leaf Springs are just a few of the available options and upgrades available when customizing this 4" 2WD lift kit.
Check out the Chevrolet 2010 concept truck using a BDS suspension system.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4" Chevy 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks.
Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" coil-overs. These have been specifically engineered to fit the BDS Suspension system and feature pre-tuned Eibach coil springs and an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These Fox coil-overs are pre-set by BDS for the correct ride height right out of the box, offering easy installation as well as the option to fine tune the ride height to your liking. Fox DSC (dual speed compression - see DSC info below) adjuster equipped coil-overs are available as an upgrade with this BDS System for those seeking additional coil-over tenability in any terrain using the revolutionary DSC technology from Fox. Both coilover options are engineered to outperform out on the road or trail while offering fade free performance to push your Chevy to the limits.
This system has been designed and rigorously tested to maximize travel and performance without compromising the factory ride quality and handling characteristics. The unique BDS High Clearance design is a true blend of performance, appearance, and function, creating a desert racing appearance with suspension geometry that compliments the factory geometry and works in conjunction with the factory stability control system. The black powdercoated high arched crossmembers blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 4" and increasing ground clearance at the front crossmember. Heavy duty, American made ductile iron steering knuckles are included to properly correct steering geometry to O.E. angles. A heavy-duty front skid plate/belly pan is included for off road protection.
Along with the rugged, high clearance design to maximize ground clearance, this new system has passed the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely affect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck.
For the rear suspension, a 4" block kit comes standard to level the stance with the option to upgrade to BDS Glide-Ride rear leaf springs for those looking to reduce axle wrap and increase towing control and stability. Custom tuned "BDS by Fox" 2.0 Performance Series IFP shocks are also included to compliment the performance and ride dynamics of the Fox 2.5 Coil-Overs up front, creating the ultimate on and offroad performance package.
FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology
The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.
- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.
- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.
This IFS system is everything you always wanted in a 2WD lift kit. Our new advanced HIGH CLEARANCE design actually increases the ground clearance at the front crossmember by 91%.
We use 1/4" thick steel, one piece front and rear crossmembers to increase frame rigidity and ease installation. New ductile steering knuckles are included that correct steering geometry to O.E. angles. Custom valved front coil over strut cylinders with 18 mm shaft are included, as well as new rear 5500 series hydraulic shocks. A full belly pan for off road protection rounds out this complete lift kit system.
Black powder coating, front skid plate, and 9500 series gas shocks and rear Glide-Ride Leaf Springs are some of the options and upgrades available when customizing this 6" 2WD lift kit.
Check out the Chevrolet 2010 concept truck using a BDS suspension system.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Coil-Over Chevy 1500 2WD suspension system with everything you always wanted in a lift kit. It features Fox 2.5" coil-over remote reservoir shocks and proven BDS parts, all covered by the BDS, no BS warranty. This system has been rigorously tested to maximize travel and performance on and off the pavement.
BDS 1/4" thick steel, one-piece, front and rear crossmembers increase frame rigidity and increase ground clearance by 91%. New ductile steering knuckles are included to correct the steering geometry. A full belly pan for off road protection rounds out this complete lift kit system for those using their 2wd trucks like 4wd's. This system comes with Fox 2.0 series rear shocks, standard.
Glide-Ride Leaf Springs and rear traction bars are some of the upgrades available when customizing this 6" 2WD lift kit.
Shotpeening increases tensile strength and reduces fatigue while lessening the material thickness required. The thinner material allows for increased wheel travel and provides a softer ride.
Bolt-style leaf alignment clamps prevent leaves from fanning out and allow the leaves to twist and flex, yielding higher articulation.
Each spring is preset using hydraulic stress to reduce fatigue in the steel and prevent sagging.
Some applications include leaf springs with steel encased rubber bushings. Other applications include blue urethane bushings.
Anti-friction pads are placed between the leaves to reduce friction within the spring and noise from metal-to-metal contact.
Tapered and roll-pointed leaves add flexibility and provides an even deflection rate. Tapering allows a smoother transition between leaves as compression takes place, resulting in a softer ride with increased wheel travel.
Springs are either cold wound with chrome silicon 9254 or hot wound with 5160 to guarantee long life.
BDS coil springs are designed to withstand full coil bind. In other words, you can smash our coils to totally flat and they will return to their original height.
A polyester based powder coat is applied to ensure flexibility and durability.
Each spring is preset with a hydraulic stress to reduce fatigue in the steel and prevent sagging.
Shotpeening increases tensile strength and allows for maximum wheel travel without sacrificing the life of the spring.