Kit Accessories

Threaded tube insert designed to weld into a tube with an ID of 1.375". 1"-14 RH This bung has a groove cut in it to provide seam clearance depending on your material choice.Threaded bung matches the small BDS forged flex end (124034,124035,124037). 1 per...

Replace your stock 2018-2026 Jeep Wrangler JL or 2020-2026 Gladiator JT adjustable front track bar with a heavy-duty BDS upgrade, constructed from high-strength 5/16" x 1.5" OD tubular construction with a gusseted end and durometer-specific bushings. Unlike other adjustable track bars on the market,...

This replacement bushing kit is designed for the BDS 2000-2001 Dodge Ram 2500 or 3500 long arm control arms. These polyurethane bushings are fluted for even distribution and include the sleeves to freshen up your Dodge when and if the time ever comes. Kit...

Improve safety and style by upgrading the rear brake lines on your 2007-2018 Jeep Wrangler JK with a set of BDS rear brake lines. Specially designed for vehicles with a 4 to 6.5-inch lift, these rear brake lines are built with stainless steel braided...

Maintain proper driveline angles on your 1999-2004 Jeep Grand Cherokee WJ by installing a BDS Transfer Case Drop Kit. These new kits utilize 1-piece steel tube spacers to drop the t-case to reposition the transfer case output shaft on lifted applications. The transfer case...

Fix driveline vibrations on your lifted 2001-2010 Chevy Silverado or GMC Sierra 1500HD, 2500HD or 3500HD with the BDS carrier bearing drop kit. Easy to install in less than an hour with all hardware included. Carrier bearing drop brackets improve driveline angle and reduce...

Replace those worn-out shock bushings with a set of polyurethane shock bushings from BDS Suspension. Much more durable than rubber, polyurethane easily is able to withstand both physical wear and road contamination. These bushings allow your shock to perform at its best while also...

Threaded tube insert designed to weld into a tube with an ID of 1.5". 1-1/4"-12 RH Threaded bung matches the large BDS forged flex end (124033). 1 per pack

When installing taller lift kits on the later model RAM HDs it is necessary to index the transfer case to improve the front output operating angle for reinstallation of the factory front driveshaft. While rare, gas trucks equipped with the manual lever-operated transfer case...

Prevent front driveline issues on your lifted Gas powered 2019-2024 Ram 2500 or 3500 truck with the BDS transfer case indexing ring kit. At 6" of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect...

Prevent front drive line issues on your lifted 2017-202 Ford F250 and F350 Super Duty 4WD truck with the BDS transfer case indexing ring kit. At 6" of lift and above it is necessary to index the transfer case to allow the front drive...

Improve handling and driveability of your 2007-2018 Jeep Wrangler JK by installing a BDS front lower alignment cam bolt kit. These cams allow you to adjust the caster in the front end of your Jeep which increases stability. The BDS Alignment Cam Bolt Kit...

This new style BDS alignment cam is far superior to tradition eccentric cams. OctoCam washers allow 5-position adjustability for caster on the front axle or pinion angle on the rear axle. The cams work with the factory control arm hardware and will not slip...

Extend the rear shock mounts on your Jeep Wrangler TJ or LJ with a BDS Lower Shock Relocation Brackets. The design eliminates interference between your Jeep's shocks and the axle housing. The heavy duty design protects shocks from damage and prevents catastrophic shock mount...

Improve the handling of a lifted 1999-2003 Ford F-150 AWD equipped with a factory front sway bar. Designed to be used with a 6-inch lift kit, the BDS front sway bar link kit will improve handling and prevent body roll. The BDS heavy-duty replacement...

Improve handling and driveability of your 1997-2003 Ford Ranger by installing a BDS front lower alignment cam bolt kit. These cams allow you to adjust the caster in the front end of your Ranger which increases stability. The BDS Alignment Cam Bolt Kit provides...

Does your truck need a little extra boost? Upgrade the rear suspension of your 1994-2002 Dodge Ram 2500 or 3500 truck with BDS rear add-a-leaf springs for improved handling through any conditions. These rear add-a-leaf springs will provide a 1- to 3-inch lift height...

Improve the handling of a lifted 2007-2018 Jeep Wrangler JK equipped with a factory rear sway bar. Designed to be used with a 3-inch lift kit, the BDS rear sway bar drop brackets will improve handling and prevent body roll. The BDS heavy-duty replacement...

Eliminate sector shaft deflection and steering system flex on a Wrangler JK Jeep with this JKS Sector Shaft and Track Bar Reinforcement System. The design increases load capacity to accommodate large tires and hydraulic assist steering. An external bearing provides double-shear sector shaft support...

Despite the impressive off-road capability of the new Ford Bronco, the position of the rear lower shock makes them very susceptible to damage. Add some much needed protection with the JKS Rear Lower Shock Skids. These 3/16" steel skids reinforce the factory shock mount...