2011-2019 Chevy Silverado 3500 | GMC Sierra 3500

When it comes time to replace the upper ball joints in your BDS upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, snap ring, and dust cap gasket (where applicable)...

Improve safety and style by upgrading the front brake lines on your 2011-2026 Chevy Silverado or GMC Sierra 2500HD / 3500HD with a set of BDS front brake lines. Specially designed for vehicles with a 6-inch lift, these front brake lines are built with...

Add protection and style to your 2011-2019 Chevy Silverado or GMC Sierra 2500HD / 3500HD truck by installing a BDS heavy-duty front skid plate. This new skid plate is designed as a bolt-on replacement for the stock skid and plastic splash guard to offer...

Upgrade the on-road comfort and off-road control of your 2011-2019 Chevy Silverado/GMC Sierra 2500 HD/3500 4WD to FOX Performance Series 2.0 IFP (internal floating piston) front shocks. Designed to fit a BDS 4 to 6-inch lift kit. The mono-tube design's internal reservoir separates the...

Improve the stance, performance, and capability of your 2011-2019 Chevy Silverado and GMC Sierra 2500 HD 4WD with a BDS 4.5-inch lift kit. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the...

Improve the handling of a lifted 2011-2019 Chevy Silverado and GMC Sierra 2500 HD/3500 HD equipped with a factory front sway bar. Designed to be used with a 4- or 6-inch lift kit, the BDS front sway bar link kit will improve handling and...

Upgrade the on-road comfort and off-road control of your Truck or Jeep to FOX Performance Series 2.0 IFP (internal floating piston) shocks. The mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum...

Upgrade your vehicle with BDS NX2 Nitro Series front shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks...

If you are looking to upgrade the inner and outer tie rods on your 2011-2026 GM 2500/3500 HD, look no further. BDS HD tie rods feature a massive forged outer housing, heat treated inner and outer ball studs, and sealed, greased joints at both...

Improve the stance, performance, and capability of your 2011-2019 Chevy Silverado and GMC Sierra 2500 HD 4WD with a BDS 6.5-inch lift kit. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the...

Upgrade the on-road comfort and off-road control of your Truck or Jeep to FOX Performance Series 2.0 IFP (internal floating piston) shocks. The mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum...

Fix driveline vibrations on your lifted 2001-2026 Chevy Silverado or GMC Sierra 2500HD or 3500HD with the BDS carrier bearing drop kit. Easy to install in less than an hour with all hardware included. Carrier bearing drop brackets improve driveline angle and reduce vibrations...

Add protection and style to your 2001-2019 Chevy Silverado or GMC Sierra 2500HD / 3500HD truck by installing a BDS heavy-duty front skid plate. This new skid plate is designed as a bolt-on installation to offer extra protection for vulnerable steering and front-end components....

When it comes time to replace the lower ball joints in your BDS lower control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for use...

Upgrade your vehicle with BDS NX2 Nitro Series front shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks...

When it comes time to replace the lower ball joints in your BDS lower control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for use...

Improve traction on your 2011-2019 Chevy Silverado or GMC Sierra 2500 HD/3500 HD SRW/DRW without limiting wheel travel with a BDS Recoil Traction Bar Mounting Kit, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on...

Increase wheel travel by upgrading the stock OE upper control arms (UCA) on your 2011-2019 Chevy Silverado or GMC Sierra 2500 HD/3500 HD to BDS performance. These arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and feature an indexed ball joint...

Give your Chevy Silverado or GMC Sierra 2500HD truck a race-winning technology upgrade to improve damping in any terrain with FOX Performance Elite Series 2.5 rear shocks with Dual Speed Compression (DSC) Reservoir Adjusters. Designed to fit a 6.5-inch suspension lift kit. Before any...

Upgrade the on-road comfort and off-road control of your Truck or Jeep to FOX Performance Series 2.0 IFP (internal floating piston) shocks. The mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum...