Ford Ranger

Upgrade your vehicle with BDS NX2 Nitro Series Steering Stabilizer shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied...

Increase the ride height and stance of your 2019-2023 Ford Ranger with the BDS 1-inch Lift Rear Shackle Kit. Designed to work with stock or lifted applications, this replacement shackle kit is designed for increased strength and improved suspension travel while providing an additional...

Level the front of your 2019-2023 Ford Ranger truck by installing this 2-inch leveling kit from BDS. Specially designed for the new Ranger, this 2" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at...

Does your truck need a little extra boost? Upgrade the rear suspension of your 1983-1997 Ford Ranger, Jeep Cherokee XJ, or Wrangler YJ truck with BDS rear add-a-leaf springs for improved handling through any conditions. These rear add-a-leaf springs will provide a 1- to...

BDS steps up the performance and capability of the 2019-2023 Ford Ranger trucks with 6-inch suspension lift kits. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires. This...

Improve handling and driveability of your 1980-1995 Ford F150, 1980-2004 Ford F250/F350, or 1994-2002 Dodge Ram 2500 by installing a BDS alignment cam kit. These cams allow you to adjust the caster or camber in the front end of your truck which increases stability....

Take your 1980-1996 Ford F350 Monobeam 4WD truck to the next level with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35"...

Take your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.0 Coil-Over shocks from BDS. Specially designed for the new Ranger, this 3.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the...

Upgrade your vehicle with BDS NX2 Nitro Series front shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks...

Properly level the front of your 2019-2023 Ford Ranger truck by installing this 2.5-inch leveling kit from BDS. Specially designed for the new Ranger, this 2.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles...

Upgrade the on-road comfort and off-road control of your Truck or Jeep to FOX Performance Series 2.0 IFP (internal floating piston) shocks. The mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum...

Improve the ride and level out your 1983-1997 Ford Ranger 4WD truck with a 6-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 33"...

Service your 2019-2023 Ford Ranger equipped with a BDS 6-inch lift kit. BDS tie rod ends utilize powdered-metal gusher bearing design enables reduced friction and enhanced strength and stability. Their metal stud with full-ball configuration provides 360 degrees of smooth, even, rotational movement for...

Custom tune the spring rate and ride height of your 6-inch lifted 1983-1997 Ford Ranger or Bronco II 4WD by swapping coil springs. A critical part of your vehicle's suspension, BDS coil springs support the weight of your vehicle's body and chassis while your...

Prevent tire rub on your 2019-2023 Ford Ranger by installing a pair of these new front intrusion beams designed to maximize clearance to fit larger tires. From the factory, the new Ranger has large intrusion beams that hang into the fender wells limiting the...

Does your truck need a little extra boost? Upgrade the rear suspension of your 1987-1996 Dodge Dakota truck with BDS rear add-a-leaf springs for improved handling through any conditions. These rear add-a-leaf springs will provide a 1- to 3-inch lift height over stock springs....

Improve handling and driveability of your 1983-1989 Ford Ranger or Bronco II by installing a BDS alignment cam kit. These cams allow you to adjust the caster or camber in the front end of your truck which increases stability. The BDS Alignment Cam Kit...

Custom tune the spring rate and ride height of your 4-inch lifted 1983-1997 Ford Ranger or Bronco II 4WD by swapping coil springs. A critical part of your vehicle's suspension, BDS coil springs support the weight of your vehicle's body and chassis while your...

Raise up your 1973-1976 Ford F100 and F150 4WD truck to new heights with a 6-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to...

Take your 1973-1976 Ford F100 and F150 4WD truck to new heights with a 4-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 33"...