Build Your Kit

Non-Critical Selections

Related Accessories

5" Coilover Radius Arm Lift Kit | Diesel Only

5" Coilover Radius Arm Lift Kit | Diesel Only

5" Coilover Radius Arm Lift Kit | Diesel Only

  • *Approx Price: $3,996.62
  • Front (base kit): 5" Radius Arm/Coilover
  • Rear (base kit): 3" Block
  • Print summary
5" Coilover Radius Arm Lift Kit | Diesel Only

Kit Components

Accessories & Pricing


Qty Part# Description
1 013414 Front Box Kit
1 013459 2020-2023 F250/F350 4.5" Rear Block Kit
1 123251 Radius Arm Box Kit
1 123613 2017-2022 Super Duty Coil-over Mount Kit
1 85431 NX2 Single Stabilizer (BDS Only)
1 88402149 Kit: BDS 11-20 Ford F250/F350 Front Coil
2 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1
2 98224718 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1
Qty Part# Description Price
    Total $3,996.62

Important Kit Notes

  • 1. Fits Diesel models only.
  • 2. Ford recommends replacement of the pitman arm nut after each time it has been removed.
  • 3. If installed on a truck with a top mounted overload spring, with an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) are required.
  • 4. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  • 5. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  • 6. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
  • 7. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section.
  • 8. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  • 9. Installation requires a torque wrench capable of 405 ft-lbs.
  • 10. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
  • 11. Due to factory ride heights being lower on 2020 and newer model year trucks, the net lift you will gain with this kit will be 1" more than advertised. (EX. 4" kit will net 5" of lift)

  • 5" Coilover Radius Arm Lift Kit | Diesel Only

  • Front (base kit):

    5" Radius Arm/Coilover

  • Rear (base kit):

    3" Block

  • Kit Price

    $3,996.62

Base Kit Components

Compatible Vehicles

IMPORTANT: Kit Notes

View Instructions (1 of 2)

View Instructions (2 of 2)

Base Kit Components 1551

These components are subject to change based upon your selections.

Qty Part# Description
(1) 013414 Front Box Kit
(1) 013459 2020-2023 F250/F350 4.5" Rear Block Kit
(1) 123251 Radius Arm Box Kit
(1) 123613 2017-2022 Super Duty Coil-over Mount Kit
(1) 85431 NX2 Single Stabilizer (BDS Only)
(1) 88402149 Kit: BDS 11-20 Ford F250/F350 Front Coil
(2) 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1
(2) 98224718 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Compatible Vehicles

These vehicles also are compatible with this product.
Click on a vehicle to see other available kits.

Make Model Year Range
Ford F250/F350 Super Duty 4WD 2020-2022

Email Summary

  *required information
*To Email Address
*To Name
*From Name
Message
Send Order

Important Kit Notes

  • 1. Fits Diesel models only.
  • 2. Ford recommends replacement of the pitman arm nut after each time it has been removed.
  • 3. If installed on a truck with a top mounted overload spring, with an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) are required.
  • 4. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  • 5. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  • 6. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
  • 7. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section.
  • 8. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  • 9. Installation requires a torque wrench capable of 405 ft-lbs.
  • 10. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
  • 11. Due to factory ride heights being lower on 2020 and newer model year trucks, the net lift you will gain with this kit will be 1" more than advertised. (EX. 4" kit will net 5" of lift)

Next: Steering Stabilizers

STATE OF CALIFORNIA CONSUMERS:
Proposition 65 WARNING!

BDS Suspension american flag image

We make every effort to buy American and we hope you do as well. Buying American ensures that you are getting quality products made from quality materials. Just as important is the fact that buying American keeps your hard-earned money in the American economy. This is one of the biggest ways we as consumers can help revitalize the American economy and strengthen the US dollar. It doesn't matter whether you are buying clothing, groceries or parts for your truck…buy American and buy with confidence that your money will stay in America.


Categories
  • Lift Kits
    		•
  • Leveling Kits
    		•

    Find your nearest participating Dealer

    Your nearest dealer information will be added to your Kit Summary